SiT2024汽车级晶振采用SOT23-5封装,提供了较好的板级焊点可靠性,符合AEC-Q100汽车标准,用于汽车和极端温度的应用。SIT2024汽车级晶振提供了较宽的频率范围(1 MHz到110 MHz)、优异的稳定性(±20 ppm)和极端温度范围(-55到125°C)的完美组合。SIT2024还具有行业中最好的0.1 ppb/g振动灵敏度,10000g冲击和70g抗振动能力。
SiT2024汽车级晶振针对发动机控制、变速箱控制、主动悬架控制、电子转向和其他ECU等引擎盖下系统进行了优化。
频率范围 | 1MHz - 110MHz,可精确到小数点后6位 |
频率稳定性(ppm) | ±20,±25,±30,±50 |
相位抖动(ps) | 1.3ps |
输出类型 | LVCMOS |
工作温度范围(℃) | -40 ~ +85,-40 ~ +105,-40 ~ +125,-55 ~ +125 |
上升/下降时间(ns) | 可配置,降低EMI |
工作电压(V) | 1.8 ~ 3.3 |
封装尺寸(mm2) | SOT23-5(2.9x2.8) |
特点 | AEC-Q100认证,可编程制程,-55℃ ~ +125℃ |
状态 | 量产 |
● 发动机和变速箱ECU | ● 石英晶振替换 | ● 汽车摄像头 | ● ADAS计算机 |
● 信息娱乐 | ● 发动机和动力系统 | ● 国防和航空航天 |
|
H[1]: specified frequency output
L: output is high impedance. Only output driver is disabled
Notes:
功能引脚示意图
脚位
功能
说明
1
GND
Power
Electrical ground
2
NC
No Connect
No connect
3
OE/ST/NC
Output Enable
Standby
No Connect
4
VDD
Power
Power supply voltage[2]
5
OUT
Output
Oscillator output
1. In OE or ST mode, a pull-up resistor of 10 kΩ or less is recommended if pin 3 is not externally driven. If pin 3 needs to be left floating, use the NC option.
2. A capacitor of value 0.1 μF or higher between Vdd and GND is required.
标题 | 时间 |
---|---|
MEMS谐振器介绍 | 2021-03-15 |
如何测量晶振频率 | 2021-03-15 |
时钟抖动定义及测量方法 | 2021-03-15 |